Mobile/WeChat:+ 8613383150716

Hebei Huachuang M&C Technology Co.,LTd You are welcome! Please contact customer service directly dial the right number!

Copyright(C) 2019  Hebei Huachuang M&C Technology Co.,LTd 

E-mail:hcck@hhcck.com

Tel:13383150716

QQ:3136408186

Add:NO.26 YINGBIN ROAD, FENGNAN DISTRICT,                                                             TANGSHAN, CHINA

MESSAGES

HCDB-30 Simple Submersible Hydrostatic Level Transmitter

1
Application:Liquid
2
Measuring Range:Min 0-0.5 Meter Max 0-350 Meter
3
Measuring Sensor Housing:Stainless Steel 304
4
Process Temperature:-20~85℃
5
Pressure Accuracy Tolerance:0.1%FS 0.2%FS 0.5%FS
6
Power Supply:24V DC
7
Signal Output:4-20mATwo fire/RS485Modbus
8
9
10
Case description

The input level gauge is based on the principle that the static pressure of the measured liquid is proportional to the height of the liquid. The pressure signal is
converted into electrical signal by the pressure sensor, and then converted into standard current signal or digital signal after temperature compensation and
linear calibration.
When the liquid level transmitter is put into a certain depth in the measured liquid, the pressure formula of the sensor diaphragm is as follows:
 
Ρ = ρ * g * H + Po
 
in the formula :
 
P → Pressure on the sensor diaphragm
 
ρ → The density of the liquid being measured
 
g → Local gravitational acceleration
 
H → the depth of where level sensor is in the liquid
 
P0 → Liquid surface atmosphere pressure
 
Use meter pressure sensor , connect the cavity of the level gauge witho the atmospheric pressure through the air tube to
 
offset the P0, so we can get P = P * g * H,  Obviously, the liquid level height can be obtained by converting the measured
 
pressure value. That is: H = P/(P * g)

 

Pressure sensor, air conducting cable, probe, meter shell, electronic components.

 

3.1  use high quality cable with air duct;  can choose field display.
 
3.2  two kinds of sensors are optional, various application conditions, ceramic sensorwith big hole design, anti-blocking, anti-corrosion.
 
3.3  use imported silicon piezoresistive sensor with high accuracy and good stability.
 
3.4  directly put into the measured liquid, simple installation.

HCDB-30 Simple Submersible Hydrostatic Level Transmitter
 
Selection and Application
 
Simple type, ceramic capacitive sensor ,without display part, max range can reach 350m( customized if beyond this range) ,
 
signal output has 2 options: (4-20)mA or RS485 Modbus standard protocol. 
 
 
Appearance and parameters
 
Sensor type: Simple Submersible
 
Measuring range: cable : Min 0-0.5 Meter Max 0-350 Meter
 
Medium temperature: -20~85℃
 
Accuracy : 0.1%FS 0.2%FS 0.5%FS
 
Power supply : 24V DC
 
Signal output: 4-20mATwo fire/RS485Modbus
型 号:
型 号::
HCDB-30 Simple Submersible Hydrostatic Level Transmitter
暂未实现,敬请期待
暂未实现,敬请期待